缝包机保养维修纽朗DS-7C热合封包机送料不顺畅跳线不钩线
作为一种自动化的摆动机针缝合机，专门设计用作密封系统（例如，纽朗KS密封机）的一部分。它具备如下特点：连续上料：当袋子通过缝合头时，调准的机针将以圆周旋转形式移动，从而可消除较长的针孔，避免机针和缝线断裂，并实现无泄漏缝合。电动进料辊可确保袋子上料的正确性，同时避免对袋子造成损害（有时由进料板引起）。DS-7A型配动缝线切刀。DS-7C型配有气动铡刀型皱纹胶带切刀。NEWLONG纽朗DS-7C缝包机/NEWLONG纽朗DS-7A缝包机/对于粉状物料，颗粒状物料包装缝合更优秀，袋子的类型有多层牛皮纸袋，复合纸袋，纸塑复合袋，编织袋等均可以包装缝合封口。NEWLONG纽朗DS-7C缝包机/NEWLONG纽朗DS-7A缝包机工作工作流程有两种方式：1，先缝口再热合2，先热合再缝口。
| Standard Specification | | Specs | Sealing speed | Heater (W) | Drive (kW) | Power (kW) | | Range | Capacity | Sealer | Sewer | | KS-12 | 6 ~ 10m/min | 500 x 4 | 0.4 | 0.4 | 3 | | KS-12C | | KS-13 | 500 x 6 | 0.4 | 4 | | KS-13C | | KS-13D | | KS-13DC | | KS-14 | 500 x 8 | 0.4 | 5 | | KS-14C | | KS-14D | | KS-14DC | | KS-16 | 500 x 12 | 0.75 | 7.5 | | KS-16C | | KS-16D | | KS-16DC | |
| Standard Specification | | Specs | Dimensions (mm) | Weight
(kg) | Options | Applications | | Length | Width | Dust cleaner | Crepe tape | | KS-12 | 2,100 | 1,020 | ca.350 | - | - | Over-tape
Innermost ply
PE film seal. | | KS-12C | 2,450 | 1,100 | ca.400 | - | ○ | | KS-13 | 2,200 | 1,020 | ca.380 | - | - | For flat 3
paper plies.
Over-tape
inner ply seal | | KS-13C | 2,650 | 1,100 | ca.450 | - | ○ | | KS-13D | 2,590 | 1,250 | ca.420 | ○ | - | | KS-13DC | 3,070 | 1,250 | ca.500 | ○ | ○ | | KS-14 | 2,500 | 1,020 | ca.420 | - | - | For flat 4
paper plies.
Over-tape
inner ply seal | | KS-14C | 2,900 | 1,100 | ca.500 | - | ○ | | KS-14D | 2,850 | 1,250 | ca.460 | ○ | - | | KS-14DC | 3,350 | 1,250 | ca.550 | ○ | ○ | | KS-16 | 3,000 | 1,020 | ca.500 | - | - | For flat 6
paper plies &
gusseted 3
paper plies.
Over-tape
inner ply seal | | KS-16C | 3,300 | 1,100 | ca.600 | - | ○ | | KS-16D | 3,260 | 1,250 | ca.550 | ○ | - | | KS-16DC | 3,720 | 1,250 | ca.650 | ○ | ○ | |
Temp. adjust range 0 to 400℃ Air req. 200NL/min(at 0.5MPa) Pressure 0.5Mpa(5kg/c㎡) (varies with speed) Sealer height adjust range 800～1400mm Add 0.55KW(50Hz) or 0.72KW(60Hz) power when optional dust cleaner is installed. Above speeds are not guaranteed ones. They are given for reference only. Length of the machine (L) varies slightly between manual insertion type and packaging machine coupling type. ＫＳ ー 1□ Ｄ Kraft sealer ― 1：Rear sewer □：Heater pairs Ｄ：Dust cleaner Ｓ：Crepe tap  |
